GRACETOP NK-206 Lithium Battery Charger with 4 Packs 18650 Li-ion Rechargeable Batteries GRACETOP Professional Care GRACETOP We are always consistently providing professional and quality general batteries of AA, AAA, C, D, 9V, 18650 etc rechargeable batteries. FCC&CE & RoHS certification supported, providing top performance and sincerely smile service. Features of GT-18650 batteries * Low self discharge technology, holds 75% of capacity after one year of no used after fully charged. * 0.1V higher than others' when fully charged, more suitable for long time usage. * Longer vitality, up to 1000 cycles, high retention rate of electric charge with excellent discharge performance at high temperature. * Good at shedding heat, short circuit and input voltage detection. Features of NK-206 USB battery charger: When your rechargeable batteries are out of power, you need a battery charger, and this NK-206 USB battery charger is a very good choice for you. It could charge 2 pcs of 16340/14500/10440/18500/18650 Lithium battery. What's more, the charger uses the MCU control technology, providing the constant current and constant voltage safety model, indicator light turns to green once the battery voltage reaches 4.1V-4.2V. Charging -- RED ; Fully Charged -- GREEN. Specification of NK-206 battery charger: Input: 5V USB (Worldwide used voltage) Max: 1000mA Output: 4.2V DC 500mA Compatible: 10440/14500/16340/18500/18650 3.7V li-ion battery Size: 12.5*3*7 CM Weight: 2.5oz Package: 4 x Rechargeable 18650 batteries 1 x NK-206 battery charger 1 x Battery box 1 x User manual
GOLISI S4 is a “smart” battery charger faster,safer and simpler to operate.And elector-circuit uses 4 independent output output charging modes with which it can charge Lithium-ion,Ni-mh and Ni-cd batteries in any model and capacity.Specifications:Control: DV Detection ODV Detection Total Time ControlHighest Voltage Detection Idling Output Voltage: 5VInput current:Li-ion 2000MA*1 1000MA*2 500MA*3 500MA*4;Ni-mh Ni-cd 1.2V 500MA*1 500MA*2 500MA*3 500MA*4Screen Display and Operation:Connecting to power supply, without batteries, the screen will be bright for 2 seconds then display “null” which denotes no batteries being loadedCharging Status and Screen Display: loading batteries, the screen will display channel / battery type / battery voltage / charging current / capacity rate. “%” flashes mean the device is charging, “%” increases until 100% which means batteries are fully charged, S4 cease charging the battery.The upper and lower part of the button controls Channel 1,2,3,4 respectively. A soft tap can show you related information including voltage /capacity /time.Button Operation: short click, LCD displays charging status. 4-second long click keeps the LCD always bright.Protection mode:Short Circuit Protection;Over-Current Protection;Reverse Connection ProtectionLoading spring: high quality springMaterials: ABS,PCWorking Temperature :0-40 CelsiusTips:Please check in your battery voltage before you use it.Our battery charger will be automatic detection different battery type Voltage between 2.0-4.2V show li-ion, the voltage is lower than 2.0v show nimd / nicd, can not charge the direct display err.
Efest LUC V4 LCD 4 bay with USB-out Multi-function Smart Battery charger 4 spring-loaded, self adjusting battery bays for charging the following battery sizes: 10440 / 16340 / 14500 / 14650 / 17500 / 17670 / 18350 / 18490 / 18500 / 18650 / 18700 / 22650 / 26500 / 26650 Li-Mn or Li-ion battery. Advantages: 1. HD mini LCD screen displays precise voltage and battery capacity level. 2. Each charging channel has independent charging display status. 3. Automatically adjusts discharge current to charge different size battery. 4. Four kinds of protection: over-discharging, over-voltage, short-circuit and reverse polarity protection. 5. Automatically stops when full changed. DC wide voltage (12-24V). Specification: Input voltage: DC 12-24V Output voltage: 4.1 % 500mA CC current : > 450mA 1000mAh CC current: > 950mA Cut-off Voltage: 4.2V ± 0.05V TC Current, 0.5-1A: 60-120mA Auto recharging Threshold Value voltage: 3.9V ± 0.15mA Activation Voltage ( battery voltage < 2V): 0.45 ±0.15mA Operation Temperature: 0-40 Storage Temperature: -40 - +70°C Compatible batteries: 10440, 16340, 18350, 18500, 18650, 26650 and so on. Certification: CE, RoHs.
LIELONGREN 510-Thread USB Smart Charger KEY FEATURES UNIVERSAL 510 THREAD ULTRA-SAFE & SMART WARRANTY ONLY IN LIELONGREN, 45 Day Refund, 12-Month Worry-Free Warranty. Professional After-Sales Team provides Free Life-time Technical Support. You Can Apply for Service Support with Your Order ID at Any Time. SPECIFICATION Input: 5V/500mA Output: 4.2V/420mA PACKAGE LIST 2 x 510-Thread USB Charger 1 x LIELONGREN Warranty Card
EBL Intelligent Battery Charger EBL 992 battery charger with individual charging slot for 1 to 2 different compatible batteries and the iQuick charging speed up to 500mA when charging, more effectively to maximize the capacity of your batteries. DC charge allowed, could be used in car and any DC charging allowed occasion. Portable and Travel suitable. Smart LED will be better for you to know its charging progress. iQuick Charging Technology Input: 100-120V AC 50/60Hz DC: 12V 8W Output: Ni-MH Ni-CD rechargeable batteries: AA, AAA, C (1.2Volt 500mA±50mA*2) Lithium-ion rechargeable batteries: 18650, 18490, 26650, 22650, 14500, 10440, 17670, 17550, 16340 (RCR123) etc. (4.2Volt 500mA±50mA*2) Output current up to 500mA±50mA, it only take half of time to make the batteries to be fully than normal battery charger. Three Charging Mode, Double Protection * Three charging mode: (Constant Charge Current (CC), Constant Charge Voltage (CV) and Trickle Charge) * Providing constant current and voltage, overheat-detection to prevent over-charging. * MCU controlled technology with △V pulse charging, automatically stop charging when charged full. Attention: Please ensure the battery installed is correct: make the +/- pole of the battery is match for the +/- pole of the charger. Working temperature for charger and batteries: Surface temperature of charger: 35℃ to 60℃ Surface temperature of batteries: 25℃ to 45℃Packages EBL 992 battery charger *1 User Manual *1 AC adapter*1
NOTICE: 1. S4 Charging Charger can work for Rechargeable Batteries Included But Not Limited to: (1)Energizer Duracell Amazonbasics Tenergy Eneloop AA/AAA. (2)Panasonic LG Sony Samsung Sanyo MXJO Orbtronic Efest Imren Nitecore EBL 18650. 2. My batteries can be charged by EASTSHINE S4 Intellicharger? (1) 9V, D Cells, 32650 or oversize can NOT. (2) No matter with Capacity, Discharge Current, PCB, Flat Top or Button Top, S4 can work. Specification 1. Input: AC 100-240V 50/60Hz 0.6A, DC 12-24V 2A 2. Output Voltage: 4.2V/3.7V/3.2V/1.5V 3. Output Current: 500mA X 4/1000mA X 4,16.8W(Liion) 4. Compatible with:Li ion/IMR/INR/ICR/LiFePO4: 26700 26650 26500 22650 22700 21700 20700 18650 18500 18490 18350 16340(RCR123) 14650 14500 14430 10440 NiMH/ NiCad: AA, AAA, AAAA, C 5. Dimensions: 5.67 X 4.06 X 1.49 in 6. Weight: 0.60Lb 7. Compliant Standards: UL,cUL,TUV,GS,PSE,FCC,CE,C-TICKCB,ROHS Features 1. Capable of charging 4 batteries simultaneously 2. Each of four battery slot monitors and charges independently 3. Optimized charging design for IMR batteries 4. Build-in LCD panel clearly displays charging parameters and progress 5. 4 conveniently located side buttons A/B/C/D allow easy selection of specific battery type and charging current 6. Automatically detects battery power status, select appropriate voltage and charge mode(with the exception of Lifepo4 batteries which require manual selection) 7. Automatically stops charging when complete, over-charge prevention to protect batteries 8. Features temperature monitoring to prevent overheating Packing Content: 1. 1 X EASTSHINE S4 4 Bay Universal Batteries Charger 2. 1 X US Wall Power Cord 3. 1 X Car Power Cord 4. 1 X User Manual
Introduction KESHEE KS2 is a Multifunctional 2-bay charger. With 2A charging current options and its built-in 0V activation, reverse-polarity protection, short-circuit protection and over-current protection, KS2 charges protects your batteries gorgeously. Specifications Applies to: rechargeable 3.7V Li-ion/IMR/INR/ICR batteries (10440~26650) Input Current: DC 5V 2A(Max) Output voltage:4.18v+-1% Output Current: 1A(Max) Compatible with Li-ion Batteries:26650/22650/26500/10440/14500/14650/16340/16650/17650/17670/18350/18490/18500/18650 Battery charger Know more about the charger How to use it? Insert USB port of data cable into the adapter with CC, CV function (or travel charger), then insert the Micro USB port into KS2, KS2 will work and test itself. The LED lights of two channels will turn on once and off again.Pay attention to the identification of positive and negative direction when you put batteries into ks2; otherwise, the batteries will not be charged. How long does it take to fully charge batteries? Charge time is determined by the capacity of the batteries divided by charging current. Take 5000mah batteries for example, KS2 needs only 5.5 hrs to full charge it. The extra 0.5 hours is because when in CV charging phrase, charging current will be gradually drops to cut-off current. Can I charge different brands Li-ion batteries simultaneously? Yes. The led indicators works shows working status independently too. Package content 1* KESHEE KS2 Charger(not include batteries) 1* Data cable 1* User manual 1* Warranty Card
Low battery alarm mode When the product is used as a power bank, if the battery power is less than 15%, the battery power grid symbol will flash, which indicates that the battery power is insufficient, and need to charge in time. Low voltage activation function When the charger is in standby status, correctly put the low voltage battery (battery voltage ≤ 2.9V) to the charging channel, the charger's charging function will start, and then activate the low voltage battery automatically. Due to the differences over the discharge times, capacity, over-discharge degree, the duration of low voltage and other factors of the low voltage battery, the activation time can be quite different. After the battery is activated, charging the battery according to the charging process. Overcharge protection and automatic detection charge function When the battery is full, the charger starts overcharge protection and stops charging automatically. If not remove the battery for a long time after charging, the charger will consume a certain amount of battery power. When the battery voltage is lower than 4.0V, the charger restarts the charging function. Specifications: Input: USB DC 5V-2A Charging current: 0.5A 500m A±10% 1.0A 1000m A±10% 2.0A 2000m A±10% (Channel 4 only) Max. Charge Voltage: 4.20±0.05V Activate current: 10m A~20mA, battery voltage
🚚 📢WHY CHOOSE US:Best Items,Excellent Custom service.4 Bay Smart Charger description as below:1.Buttons:While electricity is connected,1) press the button to change the battery type,it will start to charge 5 seconds after setting the battery type(3.2V or 3.85V),1.2V Ni-MH and 3.7V li-ion can be detected automatically,so it need set for only 3.2V and 3.8V batteries;2)change the charging current amount 4 current at any time during charging by long press the button.2.LED: While connect it to 5V input,all LED light up immediately,1)If no battery is put in,500mAh LED keeps on and others will go out.2)When battery is detected in,4 LED lights on AND 3.7V LED keep flicker to indicate to set the battery type,if no operation,it begin to charge 5 seconds later automatically under detection,four LED lights will display the charging status.3)Tap the button can show the battery type for 5 seconds.4)No electricity is connected, insert a battery can quick shows the remaining battery volume.3.USB output indicator:When USB discharging port detected,indicator of battery volume will light up for 10 seconds and go out, press button to light up again.Features:Compatible Battery: C Battery,SC Battery,Ni-MH Ni-Cd 1.2V Battery,Li-Fe 3.2V,Li-ion 3.7V,Li-ion 3.85V,26650,22650,26500,18650,18490,17670,17500,17355,16340,14500,10440,etcNote: It only could charging 2 large size battery at one time,like C,SC.26650,26500. 5V USB adapter(adaptor current 2A) is recommended.Input : Micro USB DC 5V/2A.Output: 1.42V 4.2V±0.05V 3.65±0.05V 4.35±0.05V.Current: 500mA*4 batteries,700mA*3 batteries,1000mA*2 batteries,2000mA *1 Battery. Constant voltage, cut-off current: less than 100mAh.Standby current: less than 15mAh. Size: 112mm× 90mm×30mmPackage include:1x battery charger1x USB cable1x User guide book.